DSP-HD Series   Programmable DC Power Supply
General Specifications :

TO->
PAGE 1

HOME

Panel setting resolution 4 digits
Panel display resolution 4 digits
Panel setting accuracy Voltage : ±(0.1% ± 3 Count) at rated voltage
Current : ±(0.5% ± 3 Count) at rated current
Panel display accuracy Voltage : ±(0.1% ± 3 Count) at rated voltage
Current : ±(0.5% ± 3 Count) at rated current
Command setting resolution ±0.002% of full scale
Command reading resolution ±0.002% of full scale
Command & DA setting
accuracy
Voltage ±(0.1% ± 3 Count) at rated voltage
Current ±(0.5% ± 3 Count) at rated current
Command & AD
Measurement accuracy
Voltage : ±(0.2% ± 2 Count) at rated voltage
Current : ±(0.5% ± 3Count) at rated current
Analog setting
accuracy(V)
Constant Voltagemode : Voltage 5% at rated voltage; Current 5% at rated current
Optional Isolated : Voltage 0.5% at rated voltage ; Current 1% at rated current
Analog monitor
accuracy(V)
Constant Voltagemode : Voltage 5%at rated voltage ; Current 5% at rated current
Optional Isolated : Voltage 1% at rated voltage; Current 1% at rated current
Temp. Coefficient 100ppm/℃ of rated output voltage, after a 30 minute warm-up
Temperature drift 0.05% of rated Vout over 8hrs interval following 30 minutes warm-up. Constant line, load & temp.
Command response time ≤20ms (After received) (note.3)
Transient response time Constant Voltage mode : 20V and under ≤1.5ms ; 30V~100V≤1ms ;150V~600V≤2ms;
Input voltage 750W /1500W type : 100~240Vac, 50/60Hz
3000W type : type. 190~240Vac, 50/60Hz
Input current
(Full load)
750W type : 115Vac - 8.1A ; 230Vac - 4.1A ;
1500W type : 115Vac - 16.2A ; 230Vac - 8.1A ;
3000W type : 230Vac - 15.6A
Inrush current 750W type : 230Vac <17A
1500W type : 230Vac <33A
3000W type : 230Vac <65A
Protective functions
Programmable over voltage protection(POVP), Programmable over current protection(POCP),
Over temperature protection(OTP), Fuse blown protection
Over voltage /
Over current setting range
0% ~ 110% of rated voltage ; 0% ~ 110% of rated rated current
Efficiency 750W type : 76% – 87%
1500W type : 77% – 88%
3000W type : 82% – 88%
Power Factor (PF) 0.99 (at 115Vac, rate output)
Withstand voltage Input-Output - AC2000V:1 minute
Input-Ground - AC2000V:1 minute
Weight 1UH type : approx. 5.1 kg
1U type : approx. 9.0 kg
2UH type : approx. 8.2 kg
2U type : approx. 15.1 kg
Noise <70 dB(A)
Operating environment 750W series models : Temperature : 0~40℃ ; Humidity : 30%~90% RH(no condensation)
1500W and 3000W series models : Temperature : 0~50℃ ; Humidity : 30%~90% RH(no condensation)
Storage environment Temperature : -20~70℃ ; Humidity : 10%~90% RH (no condensation)
Cooling Speed-Controlled Fan
Note.1 : All parameters are specified base on power on after 30 minutes, Ambient temperature 23±5 ℃ / Humidity : Under 80% RH, AC Voltage : ±5%, Frequency : ±5%.
Note 2. The total voltage should be lower than 600V when connect 2 units in series.
Note 3. Programming time = Command response time + Output response time. The output response time is differ according to different models, from 30mS ~ 200mS
Model Number Definition :  
     DSP    -    060    -    025    HD     B -    LXI (1)DSP : Series number. IDRC Programmable DC power Supply.
       (1)          (2)              (3)     (4)     (5)      (6)

(2)060 : Output voltage,060 means 60V.

(3)025 : Output current,025 means 25A
(4)HD : High density type.
(5)B : Bench series (2UH)
(6)LXI : LAN interface (LXI)
 
Optional Items :
Model Number Description
DSP-OPT-19HUR 1UH, 19” rack mount kit
DSP-OPT-19HU2 1UH x2 19” rack mount kit
DSP-OPT-191U 1U 19" rack mount kit
DSP-OPT-192U 2U 19" rack mount kit
DSP-OPT-488HD GPIB ( IEEE-488.2) interface (Note 4)
DSP-OPT-LXIA4 LXI interface (Note 4)
DSP-OPT-USB USB interface adapter
DSP-OPT-ISO4 Optional Isolated analog interface
DSP-OPT-PAR Socket board for convenient wiring when parallel
DSP-OPT-SER Socket board for convenient wiring when series
DSP-OPT-CAB22 DSP-HD/HR AC input cable, 3 x 12AWG(2 wires + G), 2m (For 1500W / 3000W)
DSP-OPT-CAB50 Cable for Analog Programming/Parallel/Series operation, 25cm
Note 4. This function only available for factory-shipped or re-equipped by iDRC.
Dimensions : (mm)
OUTLINE W H D HANDLE(FRONT)
HANDLE(REAR) PAD
1UH 215 44 470 X X X
2UH 215 88 470 X X X
1U 430 44 470 X X X
2U 430 88 470 55 X X
  

Previous

Next


Copyright 2016 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us