GPIB connection interface introduction
The GPIB (general purpose interface bus) was specifically designed to connect computers, peripherals and laboratory instruments so that data and control information could pass between them.
Specified transfer rate: 1 MByte per second
Cable length: 20m between controller and one device or 2m between each device, whichever is less.
The GPIB  allows up to 15 intelligent devices to share a single bus. At any time there must be one device on the bus which is the controller. 
Two-connection method :

1.bus connection method

2.star connection method

 

 

Previous


Copyright 2016 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us