HI-LO SYSTEMS ALL-100 / ALL-100P Universal Programmer
 
Introduction Features Specifications Ordering Info and Options
 
Specifications
Device Support
Pin Count : from 8 pins up to over 300 pins
Device Type: covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc.
 
Device Contact
Default - DIP48 ZIF socket
Others - SOP, TSOP, PLCC, QFP, MLF, SDIP etc. through dedicated multi-socket Programming Modules (for ALL-100P)
 
Control
Controller - 16 bits high-speed controller with big sized FPGA & CPLD
YES Key - Press for operation
Indicators - GOOD LED
BUSY LED
 
Interface Port
1x USB port.
 
Data Transfer Rate
USB 1.0/1.1 : 12 Mb/S
USB 2.0 : 480 Mb/S
 
Functions
Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, Function Configuration, Self Test
 
Host Computer Requirements
  • An Intel Pentium or compatible processor with 32MB of RAM
  • At least one USB port is available (V 1.0/1.1/ 2.0)
  • 5 MB free hard disk space with Windows 98se/Me/2000/2003 Server operating system
  • CD-ROM Driver.
 
Power
AC voltage - 100 - 240 VAC.
Frequency - 50 - 60 Hz
Power consumption - 0.5 A Rating
 
Dimension
L x W x H - 260mm x 150mm x 100mm.
 
Weight
4 kg.
 
Operating Temperature
0-40℃ (32-105℉)
 
Certification
CE mark
 
网页内容仅供参考,实际规格依原厂网站规格为准,规格若有变更,恕不另行通知。
 

Copyright 2011 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us