CG-503 交流接地阻抗測試器
Specifications:

HOME

測量阻抗範圍 0 ~ 0.1Ω / 0~0.5Ω
測量準確度 3A ~ 5A±10% of full scale; 5A ~ 30A±5% of full scale
測試電流輸出 AC3 ~ 30A
測試電壓 Max output Voltage 8V AC Typically
阻抗表頭 Indicate the testing Resistance and setting value of FALL and OFFSET.
電流表頭 Indicate the testing Current and setting value of warring
開關 Zero-Cross Solid-Sate
導通測試 1.A Warning alarm is sounded when the test current value shifts by More than roughly ±10%
2.The prescribed value can be set to any range of 3 ~ 30A.
補償功能 1.Offset range :UP to 0.1
2.Offset error : Max±5% of full scale
上限 1.Measuring range can be set between 5~100%
2.±15% of full scale with respect to reference value(3 ~ 5A)
3.±10% of full scale with respect to reference value(5 ~ 30A)
計時器 1S,10S,1Min,10Min,4range.
外部控制單元 PIN5/PIN2 short stop controlling
PIN4/PIN2 short start controlling
PIN1 out:+24V 20mA,PIN2 GND,PIN3NC
測試模式  一般 If the warning acted then the test will stop.
持續 If the warning acted then the test will be continuously
蜂鳴器警告聲 A Buzzer is sounded when the test fail acted.
測試頻率 50Hz or 60Hz independent by line voltage.
輸出訊號 TEST, PASS, FAIL, WARNING, READY, MONITOR
輸入電源 115V/230V ± 10% 1Ø 50/60Hz.
標準配件 Instruction manual x1, Test Lead CG503-1x1,Power cordx1
尺寸 430x145x415 (mm) (WxHxD)
重量 Approx:18.5kg
 
因本公司不斷追求產品改良,故規格若有變更,恕不另行通知,網頁內容僅供參考,實際規格依出貨時規格書為準。
擎宏電子保留逕行更動規格及其他產品資訊之權利,並擁有對規格之最終解釋權力,且不承擔內容之錯誤或疏失。
以上規格表內所列機箱大小為參考值,實際尺寸依需求另行議定 。
接受特殊規格訂製。
 
 

上一頁

下一頁


Copyright 2008 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us