HI-LO SYSTEMS AT3-300
 
Introduction Features Specifications Ordering Info and Options
 
Specifications
Motion
Throughput : 1,000UPH, 3.6sec/unit handler index time.
X-Y drive : High performance servo drive system.
Transmission : Ball screw & linear guide mechanism.
Resolution : X axis : ±0.02mm,
Y axis : ±0.02mm,
Z axis : ±0.02mm.
Max. stroke : X axis: 365mm,
Y axis :595mm,
Z axis: 25mm.
Theta axis resolution : 0.5°.
Pick & Place head placement accuracy : 0.08mm.
Pick & Place head placement force : <1.6kg.
Component processing range : SO8 ~ QFP256.
 
Vision
Camera : 752x582 pixels CCD x 2.
Field of view : 19.2mm x 19.2mm.
Vision alignment : Corner of body.
Vision resolution : ±0.08mm.
Process time per view : ~ 0.3 sec.
 
Programming
Built-in programmer : ALL-100 Universal Programmer.
Programming site : 8 sites x 4 sets = 32 sites.
Pin driver : 68 universal pin drivers per set.
Applicable products : PROM, EPROM, EEPROM, FLASH, MCU, PLD, PAL, FPGA.
Applicable packages: SOP, SSOP, PLCC, MLF, TSOP, BGA, BGA, QFP, TQFP.
 
I/O media
JEDEC Tray : One tray (base)or two trays (optional) for both Fresh and Pass units.
Plates for rejects : One for vision rejects and the other for programming rejects.
Tube input : 150mil, 208mil, 300mil, PLCC32, PLCC44 packages available, 4 tubes each package.
Tube output : 150mil, 208mil, 300mil, PLCC32, PLCC44 packages available, 4 tubes each package.
Tape input : 12 ~ 34mm.
Tape output : 12 ~ 34mm.
 
Control
Built-in Controller : PC-based control with Windows 2000.
Display : 17" TFT LCD monitor.
Data entry : Keyboard / mouse.
 
Power
AC voltage : 208 ~ 240V / 50-60Hz.
Power consumption : 1.0 kVA.
Internal DC voltages : 5V, 24V.
 
Air
Air pressure : 80 psi (5.56 bar).
Air consumption : 32 lt/min.
 
Dimension
W x D x H : 800mm x 900mm (base unit) x 1200mm. ( H: 1660mm with tower light installed )
W x D x H : 800mm x 1130mm (with tube-in / tube-out media installed) x 1200mm.
W x D x H : 800mm x 1500mm (with tape-in / tape-out media installed) x 1200mm.
 
Weight
Weight ~ 150kg.
 
網頁內容僅供參考,實際規格依原廠網站規格為準,規格若有變更,恕不另行通知。
 

Copyright 2011 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us